Apply Decal

How to apply a vinyl decal on a smooth surface?

 

There are 6 steps that you can follow.
1) You need to make sure the applied area is clean and dry. If the surface is smooth and flat, that will work much better. If you want to line up correctly, please use the ruler or other measurement equipments.
2) After you clean the applied area, you should take off the bottom paper. It is useless now. The vinyl decal will stick on the paper/plastic mask.
3) Prepare a hard cardboard to squeeze out the bubble.
4) Stick or tape one corner of the paper/plastic mask on the applied area. Use the cardboard to slowly move from one top corner to one bottom corner. If you apply enough pressure or force, there should not be any bubbles in the vinyl decal.
5) Take off the paper/plastic mask. It is useless now. If the vinyl decal is still stick with the paper/plastic mask. You do not apply enough pressure or force on the vinyl decal. You should repeat the above step again.
6) If everything looks well, that is done. For a better result, do not wash the applied area for 3 days. If a vinyl decal is applied inside, its life span can last over 10 years. If a vinyl decal is applied outside, its life span is 3-6 years.